China manufacturer 7.5kw 10HP CHINAMFG Oil Injected Screw Air Compressor Fix Speed 7 8 10 13 Barg air compressor repair near me

Product Description

 

Crownwell Oil-Injected Rotary Screw Compressors

 CWD 7-400 & CWD 7-400 PM
Power output: 7-400 kW / 10-500 hp
Delivery rate: 0.8-71.2 m3/min / 28-2514 cfm
Pressure range: 7-13 bar / 100-190 psig

CROWNWELL COMPRESSOR – HIGHEST STHangZhouRD

SIMPLICITY BUT NOT SIMPLE

For 3 generations, customers from mechanical engineering, industry and trade have relied on CHINAMFG know-how when it comes to plHangZhou, developing and manufacturing compressed air systems. They are fully aware of the fact that CHINAMFG AIR is more than just ordinary compressed air: utmost safety, outstanding efficiency, excellent quality, maximized flexibility along with dependable service are the ingredients to transform CHINAMFG AIR into air to work with – in China, in Asia and in more than 102 countries around the world.

The III generation, the basis for economical compressed air production

The Know-How
More than decades of know-how in manufacturing for the compressed air market. World wide knowledge in different compressed air applications have guided the development of customer specified stationary screw compressors.

Technical Advancement for your Benefit
The advantage of CHINAMFG lies in its simplified construction. Fewer components are utilized. This means a 60% reduction in main and wearing parts and over 70% fewer pipes and connections. In turn, this greatly reduces the risk of leakages, making the system environmentally friendly. Safe direct drive operation without V-belt transmission.

The CHINAMFG CHINAMFG works in the following way:
Ambient air is drawn through the intake filter and the multifunctional control system into the CHINAMFG block. This block consists of a pair of screw rotors. The main rotor, driven by an electric motor, takes the secondary rotor with it. The air is drawn in by the rotation of both of the interlocking rotors and is continually compressed. During rotation, coolant is injected into the rotors and forms a hydrostatic film between the main and secondary rotors. The function of the coolant is to seal the rotors, lubricate the bearings and adsorb the compression heat. Before compressed air leaves the compressor ( at 80 ºC approx.) it is separated from the coolant before being cooled in the aftercooler to approx.. 8ºC to 12ºC above the ambient temperature. The coolant then passes to the thermostatic control block and filter, before entering the cooler where it is cooled from approx.. 80ºC down to 50ºC. It is then injected back into the CHINAMFG block.

Features:
Direct drive via flexible coupling.
Fully encapsulated CHINAMFG CHINAMFG block.
Standard electric motor Protection Index IP23 and IP54.
User friendly service access.
Top quality, washable, oil resistant sound insulation.
Ready for operation, prewired and fully enclosed.
With operating mode selector switch Automatic-Off-Continuous.
Centrally mounted cooling fan provided for compressed air and lubricant coolers.
Compact and neat cabinet design.

Optional Equipment:
Sense of rotation
Multiple unit control with automatic base load selection
Full motor protection
Mains isolator switch for wall mounting

Beyond these features we offer a wide choice of compressed air accessories in reference to our compressor product range.
Energy Recovery Systems CROWNWELL-THERM
Compressed Air Filters
Compressed Air Dryers
Condensate Traps
Oil-Water Separators
Compressed Air Receivers

Crownwell OIL-INJECTED FIXED SPEED COMPRESSOR
 

TECHNICAL SPECIFICATIONS CWD 7-400
(7.5-400kW / 10-500hp)
 

Model Motor Power
kW / hp
Free Air Delivery
m3/min
Noise Level
dB(A)
Dimension
L * W * H
mm
Weight
Kg
7barg 8barg 10barg 13barg
CWD7 7.5 / 10 1.3 1.2 1.0 0.8 66 880*700*920 240
CWD11 11 / 15 1.7 1.6 1.4 1.2 68 1080*750*1000 400
CWD15 15 / 20 2.5 2.3 2.1 1.9 68 1080*750*1000 420
CWD18 18.5 / 25 3.2 3.0 2.7 2.4 68 1280*850*1160 550
CWD22 22 / 30 3.8 3.6 3.2 2.8 68 1280*850*1160 580
CWD30 30 / 40 5.3 5.0 4.5 4.0 68 1280*850*1160 600
CWD37 37 / 50 6.8 6.2 5.6 5.0 68 1400*1000*1290 800
CWD45 45 / 60 8.0 7.3 7.0 5.9 72 1400*1000*1290 850
CWD55 55 / 75 10.1 9.5 8.7 7.8 72 1800*1230*1570 1660
CWD75 75 / 100 13.6 12.8 12.3 10.2 72 1800*1230*1570 1800
CWD90 90 / 125 16.2 15.5 14.0 12.5 72 1800*1230*1570 1900
CWD110 110 / 150 21.2 19.8 17.8 15.5 72 2400*1470*1840 2500
CWD132 132 / 180 24.5 23.2 20.5 17.8 75 2400*1470*1840 2700
CWD160 160 / 215 28.8 27.8 25.0 22.4 75 2400*1470*1840 3000
CWD185 185 / 250 32.5 31.2 28.0 25.8 75 3150*1980*2150 3500
CWD200 200 / 270 36.0 34.3 30.5 28.0 82 3150*1980*2150 4000
CWD250 250 / 350 43.0 41.5 38.2 34.9 82 3150*1980*2150 4500
CWD315 315 / 400 51.0 50.2 44.5 39.5 82 3150*1980*2150 6000
CWD355 355 / 450 64.0 61.0 56.5 49.0 84 3150*1980*2150 6500
CWD400 400 / 500 71.2 68.1 62.8 52.2 84 3150*1980*2150 7200
  • Unit performance measured according to ISO 1217, Annex C, Edition 4 (2009)

Reference conditions:
-Relative humidity 0%
-Absolute inlet pressure: 1 bar (a) (14.5 psi)
-Intake air temperature:  20°C, 68°F

  • Noise level measured according to ISO 2151:2004, operation at max. operating pressure and max. speed; tolerance: ±3 dB(A)

Crownwell OIL-INJECTED PERMANENT MAGNET COMPRESSOR

TECHNICAL SPECIFICATIONS CWD 7-400 PM
(7.5-400kW / 10-500hp)
 

Model Motor Power
kW / hp
Free Air Delivery
m3/min
Noise Level
dB(A)
Dimension
L * W * H
mm
Weight
Kg
7barg 8barg 10barg 13barg
CWD7 PM 7.5 / 10 1.3 1.2 1.0 0.8 66 760*700*920 200
CWD11 PM 11 / 15 1.7 1.6 1.4 1.2 68 980*750*1000 350
CWD15 PM 15 / 20 2.5 2.3 2.1 1.9 68 980*750*1000 360
CWD18 PM 18.5 / 25 3.2 3.0 2.7 2.4 68 1120*850*1160 500
CWD22 PM 22 / 30 3.8 3.6 3.2 2.8 68 1120*850*1160 520
CWD30 PM 30 / 40 5.3 5.0 4.5 4.0 68 1120*850*1160 550
CWD37 PM 37 / 50 6.8 6.2 5.6 5.0 68 1280*1000*1290 750
CWD45 PM 45 / 60 8.0 7.3 7.0 5.9 72 1280*1000*1290 780
CWD55 PM 55 / 75 10.1 9.5 8.7 7.8 72 1800*1230*1570 1600
CWD75 PM 75 / 100 13.6 12.8 12.3 10.2 72 1800*1230*1570 1800
CWD90 PM 90 / 125 16.2 15.5 14.0 12.5 72 1800*1230*1570 1900
CWD110 PM 110 / 150 21.2 19.8 17.8 15.5 72 2400*1470*1840 2500
CWD132 PM 132 / 180 24.5 23.2 20.5 17.8 75 2400*1470*1840 2700
CWD160 PM 160 / 215 28.8 27.8 25.0 22.4 75 2400*1470*1840 3000
CWD185 PM 185 / 250 32.5 31.2 28.0 25.8 75 3150*1980*2150 3500
CWD200 PM 200 / 270 36.0 34.3 30.5 28.0 82 3150*1980*2150 4000
CWD250 PM 250 / 350 43.0 41.5 38.2 34.9 82 3150*1980*2150 4500
CWD315 PM 315 / 400 51.0 50.2 44.5 39.5 82 3150*1980*2150 6000
CWD355 PM 355 / 450 64.0 61.0 56.5 49.0 84 3150*1980*2150 6500
CWD400 PM 400 / 500 71.2 68.1 62.8 52.2 84 3150*1980*2150 7200
  • Unit performance measured according to ISO 1217, Annex C, Edition 4 (2009)

Reference conditions:
-Relative humidity 0%
-Absolute inlet pressure: 1 bar (a) (14.5 psi)
-Intake air temperature:  20°C, 68°F

  • Noise level measured according to ISO 2151:2004, operation at max. operating pressure and max. speed; tolerance: ±3 dB(A)
  • PM-Permanent Magnet

Crownwell TWO-STAGE OIL-INJECTED COMPRESSOR

TECHNICAL SPECIFICATIONS CWD 7-400 PM
(7.5-400kW / 10-500hp)
 

Model Motor Power
kW / hp
Free Air Delivery
m3/min
Noise Level
dB(A)
Dimension
L * W * H
mm
Weight
Kg
7barg 8barg 10barg 13barg
CWD15-2S 15 / 20 3.0 2.9 2.4 2.2 68 1480*850*1180 780
CWD18-2S 18.5 / 25 3.6 3.5 2.9 2.5 68 1480*850*1180 800
CWD22-2S 22 / 30 4.2 4.1 3.5 3.2 68 1480*850*1180 820
CWD30-2S 30 / 40 6.5 6.4 4.9 4.2 68 1720*1110*1480 1080
CWD37-2S 37 / 50 7.2 7.1 6.3 5.4 68 1720*1110*1480 1100
CWD45-2S 45 / 60 9.8 9.7 7.8 6.5 72 1720*1110*1480 1120
CWD55-2S 55 / 75 12.8 12.5 9.6 8.6 72 2100*1350*1720 2080
CWD75-2S 75 / 100 17.5 16.5 12.5 11.2 72 2100*1350*1720 2100
CWD90-2S 90 / 125 20.8 19.8 16.9 14.3 72 2460*1700*1900 3280
CWD110-2S 110 / 150 24.5 23.5 19.7 17.6 72 2460*1700*1900 3480
CWD132-2S 132 / 180 30.0 28.0 23.5 19.8 75 2900*1800*2571 3980
CWD160-2S 160 / 215 34.5 33.6 30.0 23.8 75 2900*1800*2571 4280
CWD185-2S 185 / 250 41.0 38.4 32.5 28.6 75 3800*1980*2150 5450
CWD200-2S 200 / 270 44.6 43.0 38.5 32.8 82 3800*1980*2150 5600
CWD220-2S 220 / 300 48.6 47.0 41.0 38.0 82 3800*1980*2150 6500
CWD250-2S 250 / 350 55.0 54.0 46.0 40.0 82 3800*1980*2150 6600
  • Unit performance measured according to ISO 1217, Annex C, Edition 4 (2009)

Reference conditions:
-Relative humidity 0%
-Absolute inlet pressure: 1 bar (a) (14.5 psi)
-Intake air temperature:  20°C, 68°F

  • Noise level measured according to ISO 2151:2004, operation at max. operating pressure and max. speed; tolerance: ±3 dB(A)
  • 2S-Two Stage

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Lubricated
Cooling System: AC Cooling and Air Cooling
Power Source: AC Power
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

What is the energy efficiency of modern air compressors?

The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

Variable Speed Drive (VSD) Technology:

Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

Air Leakage Reduction:

Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

Efficient Motor Design:

The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

Optimized Control Systems:

Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

Air Storage and Distribution:

Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

Energy Management and Monitoring:

Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

air compressor

Are there air compressors specifically designed for high-pressure applications?

Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:

1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.

2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.

3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.

4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

  • Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
  • Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
  • Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
  • Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
  • Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.

When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.

High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.

China manufacturer 7.5kw 10HP CHINAMFG Oil Injected Screw Air Compressor Fix Speed 7 8 10 13 Barg   air compressor repair near meChina manufacturer 7.5kw 10HP CHINAMFG Oil Injected Screw Air Compressor Fix Speed 7 8 10 13 Barg   air compressor repair near me
editor by CX 2024-05-17